AXTON, ATC100S component speakers

AXTON, ATC100S 10cm 2-Way Component Speakers

 

Well-known car audio brand Axton presents its latest 2023 series , easy-to-install component and coaxial audio systems for anyone who wants to significantly improve the sound of their car music in a few simple steps. The new Axton components ATC25S (13 cm) and ATC26S (16.5 cm) are equipped with powerful ferrite magnets, guaranteeing rich and powerful low-frequency sound. They can be easily installed in the standard speaker mounting holes of most cars. For cars with only in-door speaker locations or limited depth, Axton has prepared the ATC25N (13 cm) and ATC26N (16.5 cm) components with compact but powerful neodymium magnets. The bass construction used in these components exceeds the standards of its class - they use anthracite colored crepes, low resonance polypropylene membranes and durable nitrile rubber rims. High mechanical and electrical stability is achieved thanks to the Nomex "spider" and 25 mm coils wound on a polyimd frame. All components use a new 25mm lightweight dome woofer with a neodymium magnet that reproduces powerful and undistorted sound up to 20kHz even under heavy loads. The subtle sound of the high-frequency depends very much on the position in which it is installed - the adapters in the set provide universal mounting options for embedding the high-frequency in the finish or mounting it on the surface. Despite their compact dimensions, the frequency filters (crossovers) are carefully assembled: they use high-quality MKT foil capacitors; aukðfrequencies can be adapted to any situation by adjusting them in three levels (+3 dB / 0 dB / -3 dB).

Key features Mid/woofer

• Strontium-ferrite magnet

• Polypropylene conical diffuser

• NBR nitrile rubber rim

• Polyimide coil frame

• 2-layer CCA wire coil

• Gold-plated contacts

High frequency speaker

• 25 mm black ðilk dome tweeter with neodymium magnet

• Polyimide coil frame

• Ferrofluid coil cooling

• Complete with mounting adapters Frequency filter (crossover)

• High frequency suppression in three steps +3dB/0dB/-3dB

• MKT capacitor for tweeter

• Screw-in gold-plated contacts

Technical data

• 2-way 10 cm component speakers

• Maximum power: 80 W

• Rated power (RMS): 60 W

• Reproducible frequency band: 90 Hz - 25 kHz

• Nominal resistance: 4 ohms

• Sensitivity (1W/1m): 86 dB

• Installation diameter: 93 mm

• Installation depth: 39 mm

 

The speakers are designed to be connected to a tape recorder.

Manufacturer: AXTON, Ðweiceria

 

80 W

• Rated power (RMS): 60 W

• Reproducible frequency band: 90 Hz - 25 kHz

• Nominal resistance: 4 ohms

• Sensitivity (1W/1m): 86 dB

• Installation diameter: 93 mm

• Installation depth: 39 mm

 

The speakers are designed to be connected to a tape recorder.

Manufacturer: AXTON, Ðweiceria

 

80 W

• Rated power (RMS): 60 W

• Reproducible frequency band: 90 Hz - 25 kHz

• Nominal resistance: 4 ohms

• Sensitivity (1W/1m): 86 dB

• Installation diameter: 93 mm

• Installation depth: 39 mm

 

The speakers are designed to be connected to a tape recorder.

Manufacturer: AXTON, Ðweiceria